HCL:Toshiba laptops
(перенаправлено с «HCL/Laptops/Toshiba»)
 |
Аппаратные средства - Ноутбуки Acer - Apple - Asus - Compaq - Dell - Digital - ECS - Fujitsu - Gateway - Hitachi - Higrade - HP - IBM/Lenovo - Medion - Micron - Mitac - Mitsubishi - NEC - Panasonic - Samsung - Sony - Toshiba - Zenith - Другие |
|
Данная статья является устаревшей, поскольку: Следует переработать см. английскую. Если она в течение некоторого времени не будет обновлена, то она может быть удалена. Пожалуйста, обновите эту статью. Обратитесь к странице обсуждения этой статьи для получения подробной информации. |
| Модель | SUSE Линукс / openSUSE Release |
Поддерживаемое оборудование | Пометки: | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Видео | Звук | Локальная сеть |
Беспроводная сеть |
Блютуз | Управление питанием |
Другие | ||||
| Portege 7140ct | 10 beta 3 |  |
|
|
|
 |
(even suspend to ram) |
Modem not tested, but detected | ||
| Portege R100 | 10.3 | with grub vga=791, sax not working |
|
|
|
|
|
Modem not tested, but detected | ||
| Portege R200 | 11.0 | with grub vga=0x318 |
|
|
|
|
|
Modem not tested | ||
| Portege M200 | 10.0 | 3D supported with NVidia drivers |
|
|
|
|
Suspend to RAM: Disk:  |
SD ; Modem |
||
| Portege M200 | 10.2 | 3D supported with NVidia drivers |
|
|
|
|
Suspend to RAM: Disk: |
SD ; Modem |
||
| Portege M300 | 10.2 | |
|
|
(with madwifi) |
|
Suspend to RAM:  Disk: |
Modem |
Rebooting does not seem to work when dual-booting with Windows. Fine on its own. | |
| Portege M600 | 10.3 | |
Use latest alsa repositorie (multimedia:/audio/) |
|
|
|
Suspend to RAM: Disk: CPU freq. scaling: |
SD: Modem Webcam: Media Keys: |
No problems with vista dual-booting | |
| Qosmio G25 | SLED 10/ OpenSuse 10.1 | 3D w/ NVidia drivers |
|
|
|
|
at least questionable |
Modem not tested, but detected | FnFx for function keys, external sound control doesn't work (dial on side), otherwise very functional | |
| Qosmio G25 | OpenSuse 10.3 | 3D w/ NVidia drivers |
|
|
|
not tested | not tested | Modem detected but not tested | function keys works but not special keys (buttons above keyboard), external sound control works (dial on side), Haven't tried TV | |
| Satellite 2430-255 | 10.1 | 3D supported with NVidia drivers |
|
|
|
|
Suspend: CPU freq. scaling: |
Modem detected, but not tested Secure Digital |
Use Omnibook kernal module for special keys, temp. monitors, & better ACPI | |
| Satellite 2430-301 | 9.3 | 3D supported with NVidia drivers |
|
|
|
|
|
Modem does fine | ||
| Satellite 4090xcdt | 10.0 | |
|
(PCMCIA) |
|
|
|
Modem detected but not tested | ||
| Satellite A25-S279 | 10.1 | (3D unsupported) |
|
|
(via http://madwifi.org/suse repository) |
|
Suspend to RAM: Disk: |
SD (requires kernel >= 2.6.18); Modem |
Special Fn actions and multimedia keys working by loading the toshiba or toshiba_acpi modules and using a program to monitor these | |
| Satellite A30-203 | 10.3 | |
|
|
|
|
|
|||
| Satellite A70 | 10.0 Beta4 | (3D unsupported) |
|
|
(needs kernel-default-nongpl package) |
|
Suspend to RAM: Disk: |
SD ; Modem |
Special Fn actions and multimedia keys working by loading the toshiba or toshiba_acpi modules and using a program to monitor these | |
| Satellite A75 | 10.2 | 3D supported with ATI driver |
|
|
with madwifi |
|
Suspend to RAM: Disk: with "noapic" in kernel parameters Processor Throttling: |
Modem: Card Reader |
need "noapic" in kernel parameters or else system locks randomly. (note the machine doesn't use Toshiba Bios, so most standard Toshiba fixes don't work) | |
| Satellite A100 | 10.2 | 3D supported |
|
|
|
|
Suspend to RAM: Disk: |
Modem: |
||
| Satellite A105 | 10.2, 10.3 | 3D supported |
|
|
|
|
Suspend to RAM: Disk: Processor Throttling: |
Modem: Card Reader (Only tested with SD card) |
Problems with rebooting, have to manually hold power button. Everything else works fine. Might have been kernel problem, tested with 10.2. | |
| Satellite A110 | 11.0 | 3D not initially supported - no ATI driver included |
|
|
|
|
Suspend to RAM: Disk: |
Modem: |
Suspend to Disk didn't work from the liveCD, but did after installing to the hard drive. Madwifi may provide support for the wireless Atheros card, but the Kernel Module requires a currently unavailable update to the kernel before it can be installed. | |
| Satellite A135-S2266 | 10.2 | 3D supported with ATI Driver |
|
with madwifi |
|
|
Suspend to RAM: Disk: |
Modem detected but not tested | Speakers still work when headphones connected | |
| Satellite A135-S2276 | 10.2 | 3D supported with ATI Driver |
need BIOS Update V.1.20 or higher |
|
Atheros AR5006EG works with madwifi v0.9.2 or higher |
|
Suspend to RAM: Disk: |
Modem: |
||
| Satellite L10 - 101 | 10.0 | (needs kernel-default-nongpl package) |
|
Suspend to RAM: Disk: |
Modem detected but not tested | No ACPI (smart battery system, | ACPI after kernelpatch) | |||
| Satellite L30-10T | 10.3 | (Wide screen Needs ATI drivers, no 3D) |
needs alsa >= 1.0.16, default codec | |
(Atheros AR5005G works w/ madwifi) |
|
Suspend to RAM: S2RAM="-f " Disk: HIBERNATE_METHOD=kernel |
|
Not tested | |
| Satellite L35-S1054 | 10.2 | (3D Needs ATI drivers) |
|
|
(Atheros AR5005G works w/ madwifi) |
|
Suspend to RAM: Disk: |
(Modem not detected may need kernel module) | (So Far Headphone Jack Does Not Work) | |
| Satellite M30-304 | 10.0 | (3D needs NVidia drivers) |
|
|
|
|
Suspend to RAM: Disk: |
Modem detected but not tested | 3D acceleration works as described on NVIDIA | |
| Satellite M30-304 | 10.1 | (3D needs NVidia drivers) |
|
|
(requires 'npw-firmware' package which is not available) |
|
Suspend to RAM: Disk: |
Modem detected but not tested | Screen blanks when resuming from disk, coming back after considerable delay | |
| Satellite M40X-286 | 10.0 and up | (Needs ATI drivers: see ATI) |
|
|
(using madwifi) |
|
openSUSE up to 10.3: openSUSE 11: |
Modem detected but not tested. Internal card reader detected, at moment not tested. | After installation, it won't boot into GUI, you have to log-in root into console, then run SAX2 and reboot (OpenSUSE 10.2). After suspend wireless won't connect anymore: see bug 222529. | |
| Satellite M40-288 | 10.0 | (3D unsupported) needs ATI drivers |
|
|
|
|
Suspend to RAM: Disk: |
Modem detected but not tested | Hangs after install when starting X-server.
See here for more details. | |
| Satellite M40-288 | 10.1 | (3D unsupported) needs ATI drivers |
|
|
Requires madwifi or ndiswrapper |
|
Suspend to RAM: Disk: (Requires noapic boot parameter) |
Modem detected but not tested | Shows garbage after starting X-server. Requires VESA or ATI drivers.
See here for more details. | |
| Satellite M45-S265 | 10.1 | Some Open GL issues to be resolved. |
Works after adding pci=noapic to boot |
|
|
BT USB Adaptor Works |
Suspend (RAM & Disk): Not Tried Frequency scaling of CPU: Battery: Dimming of display: |
Modem: , Detected but not tested Firewire: PCMCIA: Cardreader: Not Installed - Optional Component |
||
| Satellite M45-S331 | 10.1 | |
|
, but crashes from time to time and needs a "rcnetwork restart" |
|
|
Suspend (RAM & Disk): , but afterwards no network connection can be established Frequency scaling of CPU: Battery: Dimming of display: |
Modem: , but needs manual installation of slmodem (v2.9.11, compile with ALSA support!) Firewire: PCMCIA: Cardreader: |
||
| Satellite M70-244 | 10.0 | (ATI drivers) |
|
|
|
|
Suspend to RAM: Disk: |
|
||
| Satellite P25-487 | 10.2 | (nVidia driver) |
|
|
|
|
Suspend to RAM: Disk: |
Modem: CD buttons |
||
| Satellite Pro L20 | 10.1* | |
|
|
|
|
Suspend to RAM: Disk: |
Modem not tested | Hangs after install when starting X-server.
See here for more details. | |
| Satellite Pro SP 4600 | 10.2 10.3 |
|
|
|
|
|
Suspend to RAM: Disk: |
Modem: detected but not tested | WLAN with PCMCIA card:
| |
| Satellite Pro SP 6000 | 10.2 10.3 |
|
add usergroup 'audio' for all users |
|
|
|
Suspend to RAM: Disk: |
Modem: |
WLAN with PCMCIA card:
| |
| Tecra 8000 | 10.0 RC1 | |
|
(PCMCIA Card) |
|
|
Suspend to Disk: |
Modem not tested | ||
| Tecra A3 | 10.0 | |
|
|
|
|
Suspend to RAM: Disk: |
Modem not tested | ||
| Tecra A7 | 10.2 | Needs ATI proprietary driver |
|
|
|
|
Suspend to RAM: Disk: |
Modem not detected/not working | ||
| Tecra A8 | 10.2 | |
Add model=basic to snd-intel-hda line in /etc/modprobe.d/sound |
|
|
|
Suspend to RAM: Disk: |
Modem not tested | ||
| Tecra A8 | 10.3 | |
Installed alsa-firmware and added model=basic to snd-intel-hda line in /etc/modprobe.d/sound |
|
|
|
Suspend to RAM: Disk: |
Modem not tested | ||
| Tecra A8 PTA83E | 11.0 | |
|
|
|
Needs the module "toshbt" to work | Suspend to RAM: Disk: |
Modem not tested | The screen resolution and the touchpad were not properly set up, I had to modify xorg.conf manually. If you want bluetooth, you need to load the toshiba_acpi module (comes with opensuse's default kernel) and after that toshbt module (does not come with opensuse's default kernel, you need to download it and compile it separately). Thanks to everybody involved in releasing this fine distribution. | |
| Tecra S1 | 10.3 | |
|
|
|
|
Suspend to RAM: Suspend to Disk: |
Modem not tested | ||
| Tecra S3 | 10.2 | |
|
|
|
|
Suspend to Disk: |
Modem not tested | ||
| Satellite P100-115 | 10.1 | 3D supported with NVidia drivers. But graphics card fan never turns on-overheating problem |
(with acpi=off there is sound)
(New info acpi_osi=!Linux gives sound) |
|
|
|
Suspend to RAM: Disk: |
Modem not tested | There is some problem with ACPI or video driver, because graphics card fan doesnt turn on and graphics card gets overheated. Solution is acpi=off and having fans on all the time
oldcpu: reference for acpi_osi=!Linux fix: http://www.suseforums.net/index.php?showtopic=40851&hl= | |
| Satellite P100-PSPA4E | 10.3 | 3D supported with NVidia drivers. |
(fixing the DSDT will solve the problem)
|
|
|
|
Suspend to RAM: Disk: |
Modem not tested | There is some problem with DSDT, but the below referenced link gives you very concise instructions on how to fix it. Please disregard the fact that the instructions were written for a P100-105. Also, these instructions were tested with BIOS versions 2.40, 3.30 and 3.80. | |
| Satellite P200 | 11.0 | ATI drivers installed correctly with one click install |
|
|
minor discovery problems (switch wlan before boot) |
|
Suspend to RAM: Disk: |
modem: card reader: detectedwebcam: install gspcavmultimedia keys: see xmodmapcompiz: update |
||
| Satellite M100 | 10.3 | |
|
|
|
|
Suspend to Disk: |
Modem not detected | 10.3 standard install and it supports all the following features of this laptop - (1)Finger print reader works, (2) Built-in card reader works with SD - tested with 2GB SD card (no driver yet for Memory Stick) Noted the following issues: Overall, i get all toshiba M100 functionality straight out of 10.3 install, very impressed. |
|
| Satellite A200 | 10.3 | (ATI drivers installed correctly with one click install, but XGL doesn't work) |
|
|
|
All Bluetooth daemon dies after launching, do not detect my Logitech Bluetooth Mouse |
Suspend to RAM: Disk: |
None of the special function key or multimedia key works. After installing ATI driver 8.40.7, 3D support for my ATI HD 2600 is enabled and resolution of LCD detected correctly, but you would never enter desktop with XGL enabled oldcpu note: special function keys can be made to work with xmodmap command. This FD7 approach works on SUSE. http://www.immv.es/index.php?page=linux-on...oshiba-a200-12x || | ||
| Satellite A300 | 11.0 | |
|
config instructions |
|
|
Suspend to RAM: Disk: |
|||
| Satellite A210-109 | 10.3 | Using ATI driver. |
|
|
Use ndiswrapper |
not tested | Suspend to Disk Suspend to RAM (`s2ram -f` tested with ATi proprietary driver v8.3) |
Modem not tested. Card Reader recognized and works without problems. | Installation proceeds as usual, no specific tricks or problems there. You only need to get the windrivers for setting up WLAN chip with ndiswrapper. Toshiba Hotkeys not (yet) supported. | |
| Satellite A215-S7428 | 11.0 | Using proprietary ATI driver. |
|
|
not tested | not tested | Suspend to Disk Suspend to RAM |
Modem not tested. | Installation proceeds as usual, no specific tricks or problems there. After install, done 1-click install of ati driver. | |
| Satellite U300-PSU34C | 10.3 | Using Intel driver. Needs 815resolution on 10.2 |
Get the latest Alsa drivers, do ONLY 'make' for the drivers, install, and configure in Yast. Edit modprobe.d/sound and set as follows to get it working: 'options snd-hda-intel enable=1 index=0 model=ref position_fix=1' |
Works with 10.3. 10.2 needs newer module. |
with latest ndiswrapper and net5211.inf. Card is NOT supported by madwifi yet (AR5006EG). If you have already installed madwifi, you MUST blacklist the ath_pci module for it to work. |
|
Suspend to RAM: Disk: |
Modem: Unsupported as yet, see: http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00915.html Webcam: Works out of the box with 10.3 |
No Hotkeys, as toshiba_acpi module does NOT support this laptop yet. | |
| Satellite L300-11G | 10.3 | Need to install Intel driver |
|
|
|
|
|
Modem not tested, but detected | ||
| Satellite L300-11E | 10.3 | |
|
|
|
|
Suspend to RAM: Disk: |
Running the HD controller in the AHCI mode demands recreating the 'initrd' file by means of 'mkinintrd -m ahci' (as a root after booting in the controller's compatibility mode). | ||
| Satellite P300D-10U | 11 | only with ATI Proprietary Linux Display Driver |
|
config instructions |
not tested |
|
Suspend to RAM: Disk: |
Webcam: |
After install and reboot, use Ctrl+Alt+F1, logon as root. 1. Configure LAN config instructions | |